EBPMS Intelligent Trailer Braking Performance
Brake Compliance Monitored on Every Journey.
Many fleets spend hours every month on roller brake tests that confirm what continuous EBPMS data can reveal between inspections. Our EBPMS monitors braking performance across every journey, helping you build a stronger compliance trail, cut unnecessary workshop visits and keep your trailers on the road where they earn.
Predictive braking intelligence
The platform continuously analyses braking efficiency, brake demand, lining wear, temperature patterns and axle loading to flag deterioration before it becomes a failure. You see the warning before you see the breakdown, and plan the repair rather than react to it.
Condition-based servicing
Move away from fixed-interval maintenance and service trailers according to their actual braking condition. Trailers that are performing well stay on the road. Trailers that need attention get booked in. The result is fewer unnecessary inspections, better workshop utilisation and lower maintenance costs.
Complete fleet intelligence, not just brake data
EBPMS sits on the same connected platform as your tracking, cameras, tachograph analysis, compliance dashboards and AI reporting. Braking data connects with driver behaviour, route patterns and load profiles to give you the full picture from a single dashboard.
Reduce Costs
You already know what brake testing costs you.
Every six weeks, every ten weeks, or whenever your PM inspection schedule dictates, you pull a trailer off the road, book it into the workshop and run it across a roller brake tester. Most of the time, the brakes are fine. The trailer goes back out and you have lost a morning of earning time to confirm what you already suspected. Now multiply that across your entire fleet.
The current approach is built around snapshots. A roller brake test tells you how the brakes performed at one moment, at one load, on one day. It cannot tell you whether that trailer’s braking has been quietly deteriorating over the past three months, or whether the next journey will be the one where performance drops below the threshold at a roadside check.
A fundamental shift in how trailer braking is monitored.
Rather than relying on periodic roller brake tests at fixed intervals, EBPMS continuously collects and analyses braking data during everyday operation. Every time your driver applies the brakes, the system records it and builds a comprehensive picture of each trailer’s braking performance across different loads, routes and conditions.
The DVSA Guide to Maintaining Roadworthiness strongly advises laden brake testing, but achieving this at every safety inspection is difficult and costly. EBPMS overcomes this by monitoring continuously under real operating conditions. In practical terms, this can support a reduction in scheduled roller brake tests between annual MOT checks, where the system and evidence are accepted for use in that way.
Predict. Optimise. Protect.
Predict
Detect developing faults before they become failures, breakdowns or MOT defects.
The platform analyses brake efficiency trends, brake demand over time, lining wear rates, temperature patterns, axle loading and driver braking behaviour to identify deterioration early. You see the warning before you see the failure.
Move from reactive repairs to predictive maintenance, even if your fleet has always relied on fixed-interval servicing.
Optimise
Reduce unnecessary maintenance, maximise trailer uptime and improve workshop efficiency.
With condition-based servicing, you maintain trailers according to their actual braking condition. Trailers that are performing well stay on the road earning revenue. Trailers that genuinely need attention get booked in.
Protect
Improve road safety, support DVSA compliance and gain complete visibility across every trailer in your fleet.
Continuous monitoring gives you a stronger maintenance trail than periodic testing alone. You are in a far stronger position when the DVSA asks to see your records or when an incident requires you to prove your maintenance regime was sound.
Why Red Lake Solutions
One connected platform, not another silo
Most EBPMS providers give you braking data and little else. Red Lake Solutions combines intelligent trailer braking with live GPS tracking, driver behaviour analysis, remote tachograph downloads, AI-powered reporting, compliance dashboards, dash cameras and workshop scheduling. Everything connects under one login, from one supplier.
Predictive intelligence, not just compliance alerts
Existing EBPMS solutions primarily trigger alerts when performance drops below a regulatory threshold. Red Lake Solutions correlates brake performance with driver behaviour, route patterns, axle loading and component wear rates to deliver predictive maintenance recommendations rather than reactive fault codes.
Driver and trailer performance correlation
The platform can show you that a particular driver consistently generates higher brake temperatures, or that a specific trailer only exhibits reduced braking efficiency when hauled by a certain vehicle. Driver behaviour, vehicle behaviour, trailer behaviour, route behaviour and load behaviour in one connected view.
Trailer location for up to four months without power
Your trailers report their location for up to four months even when disconnected from power, combined with Thatcham-approved security tracking and an Unhook Alert system that detects if a trailer separates while cables are connected. Complete trailer protection: brakes, security and location under one roof.
UK-based support with professional installation
You deal with a UK team that installs, supports and maintains the system. Every installation is carried out by certified engineers, and support is handled by people who understand UK fleet operations and DVSA compliance requirements. No faceless platform, no DIY fitting and no third-party installers to chase.
EBPMS Benefits
Reduced brake-test frequency
Continuous monitoring can support fewer scheduled roller brake tests between annual MOT checks. Less workshop time, less disruption and more trailers on the road.
Earlier defect detection
Act on a deteriorating brake before it becomes a roadside failure, a VOR event or a failed annual test. The platform flags the trend, not just the fault.
Less downtime
Trailers that are performing well stay on the road. Your workshop time goes to the trailers that genuinely need attention, not a fixed calendar.
Better compliance evidence
Continuous monitoring records demonstrate proper brake performance oversight throughout the year, not just on the day of a periodic test.
Confident maintenance decisions
Decisions based on real performance data from real journeys, rather than a single snapshot under workshop conditions.
Fewer surprises
If a trailer’s braking performance starts to drift, you know about it before it becomes an expensive problem, a delayed load or an enforcement headache.
How it works
You do not need to overhaul your operation. You start with a conversation.
Tell us about your fleet
Share your fleet size, trailer types and current maintenance regime, and we will assess where EBPMS fits alongside the rest of your fleet technology.
Book a live demonstration
See the platform working with real trailer data, and understand exactly what it will show you about your fleet’s braking performance.
Get fitted and go live
Our certified engineers install the system, and you start receiving braking intelligence from your very first journey.
Keep your trailers legal and on the road.
From April 2025, DVSA requires four laden brake tests per trailer every year or an approved EBPMS. Whether you run 1 trailer, 50 or 500, EBPMS helps you stay compliant, cut test costs and workshop time, reduce the risk of prohibitions and fines, and spend less time on paperwork. Ready to make brake testing work for your business?
